The Answer To Why Your Toilet Tank Won’t Fill: Get The Help You Need From Plumbing Contractors

If you notice your toilet isn’t flushing properly, it could be a tank issue. Lift the lid (if it’s accessible) of your toilet tank and take a look inside. This tank runs clean water, which helps your toilet flush and is essential for maintaining proper drainage. If the tank is empty, there could be a problem with the fill valve or the plumbing system.

At Full Spectrum Plumbing Services, we specialize in home and sewer line repairs. business plumbing across Rock Hill. Working closely with local families, we’ve come to know a thing or two about empty toilet tanks and how to fix them using the right plumbing tools.

Generally, if you notice an empty tank, it means one of three things: a faulty fill valve, issues with the sewer line, or a need for replacement parts.

• Something in the plumbing system needs to be replaced.
• The toilet needs to be updated
• It’s time to call a plumber for a quick repair.

Here, we’ll talk a bit about why your toilet tank might be empty, how it can be fixed, and the importance of proper drainage.

Fill Valve Issue: Fixing The Problem With Professional Plumbing Supplies

The fill valve in your toilet controls how much water comes into your tank after you flush and use the reserves, which is crucial for the plumbing system and adheres to plumbing code. The fill valve gets a workout over time and can slip out of place, affecting the entire plumbing system and possibly requiring plumbing supplies for repair. If your valve isn’t sitting right in the tank, you can readjust it to manage water levels.

Adjusting the fill valve is something you can do yourself or call a plumber for help with the plumbing fixtures, including the water heater installation. If you move the valve yourself, follow these steps:

• Open your toilet tank
• Turn water level adjustment rod screw until the float cup moves
• Moving the float cup up raises the water, and down lowers the water, helping to prevent clogs in the plumbing system.
• Flush the toilet to check progress and ensure the water flows properly through the sewer line.
• Repeat process until your toilet fills correctly
• Replace the toilet tank lid

Never force anything that doesn’t want to move in your plumbing system. If you try to turn the screw and it’s stuck, it’s best to call a professional for help. Forcing the screw could damage the adjustment rod. If you break the rod, you’ll be out a part and need to have it replaced to flush your toilet properly, which may require plumbing supplies.

Old Float Ball: One of The Most Important Plumbing Parts and Supplies

If your toilet is older, it likely has an object called a float ball inside. As the name implies, this little ball floats on the top of the water in your tank. It tells your toilet tank how high the water should fill. If the float ball is too low in the tank, your water level will reflect this, potentially leading to a clog in the plumbing system.

Like the fill valve, you can manually fix the position of your float ball without a professional. To do so, follow these steps:

• Open toilet tank
• Carefully slide a finger beneath float arm and lift upward slightly
• The float ball should move and the tank should fill
• Replace the tank lid and check the faucet for any leaks.

Flush the toilet and watch the ball position; if it resumes its low level in the tank, it might need a replacement. An old float ball isn’t a huge problem, but it does mean a trip to the hardware store or a call to your local plumber. In Rock Hill you shouldn’t have a problem locating a float ball, but if you do, we can help with plumbing supplies.

Toilet Trip Lever Isn’t Working

The handle you use to flush your toilet from the outside of the tank is connected to a trip lever inside. If the internal trip level isn’t working, the toilet won’t flush, the tank won’t fill, and your plumbing system may be compromised. Unfortunately, most trip lever problems require a new lever, which can be found among plumbing supplies.

To see if the lever is the issue, remove the lid of your toilet tank and look inside the plumbing system for any faulty tubing. The lever is near the handle, inside the tank. It commonly looks like a long metal rod, bent to resemble a lever, and is crucial for the installation of the flushing system.

This is connected to the flush valve and may require new pipe fittings.

Flush the toilet with the tank lid off and watch the trip lever. If the lever doesn’t move, isn’t connected to the valve, or moves but the toilet still doesn’t flush, it could require some plumbing tools for fixing. Trip assembly is delicate, and if it’s not positioned properly, it could be the difference between a flushing toilet and a broken one.

At Full Spectrum Plumbing Services, we don’t recommend you try to fix a broken trip lever by yourself; it may require specialized plumbing repair and the right wrench. The biggest issue is that the trip lever connects so many other parts of your flushing mechanism, which can affect the drainage system. If you damage something else in the process, it could mean spending more time and money on the plumbing repair resolution.

Contact Full Spectrum Plumbing Services Today!

If you’re experiencing problems with your toilet tank and you live in Rock Hill, Full Spectrum Plumbing Services is on the job. We work with homeowners and businesses across the city and are happy to help with plumbing tools and supplies. Contact us today for expert plumbing installation and maintenance services. to be in touch to a member of our team and to learn more about how we can help.